Ionic liquid

An ionic liquid (IL) is a salt in the liquid state. In some contexts, the term has been restricted to salts whose melting point is below some arbitrary temperature, such as 100 °C (212 °F). While ordinary liquids such as water and gasoline are predominantly made of electrically neutral molecules, ILs are largely made of ions and short-lived ion pairs. These substances are variously called liquid electrolytes, ionic melts, ionic fluids, fused salts, liquid salts, or ionic glasses.

ILs have many applications, such as powerful solvents and electrically conducting fluids (electrolytes). Salts that are liquid at near-ambient temperature are important for electric battery applications, and have been used as sealants due to their very low vapor pressure.

Any salt that melts without decomposing or vaporizing usually yields an IL. Sodium chloride (NaCl), for example, melts at 801 °C (1,474 °F) into a liquid that consists largely of sodium cations (Na+) and chloride anions (Cl). Conversely, when an IL is cooled, it often forms an ionic solid—which may be either crystalline or glassy.

The ionic bond is usually stronger than the Van der Waals forces between the molecules of ordinary liquids. For that reason, common salts tend to melt at higher temperatures than other solid molecules. Some salts are liquid at or below room temperature. Examples include 1-ethyl-3-methylimidazolium dicyanamide, (C2H5)(CH3)C3H3N+
2
·N(CN)
2
, that melts at −21 °C (−6 °F);[1] and 1-butyl-3,5-dimethylpyridinium bromide which becomes a glass below −24 °C (−11 °F).[2]

Low-temperature IL can be compared to ionic solutions, liquids that contain both ions and neutral molecules, and in particular to the so-called deep eutectic solvents, mixtures of ionic and non-ionic solid substances which have much lower melting points than the pure compounds. Certain mixtures of nitrate salts can have melting points below 100 °C.[3]

The term "ionic liquid" in the general sense was used as early as 1943.[4]

Contents

History

The discovery date of the "first" ionic liquid is disputed, along with the identity of its discoverer. Ethanolammonium nitrate (m.p. 52–55 °C) was reported in 1888 by S. Gabriel and J. Weiner.[5] One of the earliest truly room temperature ionic liquids was ethylammonium nitrate (C2H5)NH+
3
·NO
3
(m.p. 12 °C), synthesized in 1914 by Paul Walden.[6] In the 1970s and 1980s ionic liquids based on alkyl-substituted imidazolium and pyridinium cations, with halide or trihalogenoaluminate anions, were initially developed for use as electrolytes in battery applications.[7][8]

An important property of the imidazolium halogenoaluminate salts is that their physical properties—such as viscosity, melting point, and acidity—could be adjusted by changing the alkyl substituents and the imidazolium/pyridinium and halide/halogenoaluminate ratios.[9] Two major drawbacks for some applications were moisture sensitivity and acidity/basicity. In 1992, Wilkes and Zawarotko obtained ionic liquids with 'neutral' weakly coordinating anions such as hexafluorophosphate (PF
6
) and tetrafluoroborate (BF
4
), allowing a much wider range of applications.[10] Recently a new class of air– and moisture–stable, neutral ionic liquids became available. Research has also been moving away from hexafluorophosphate and tetrafluoroborate towards less toxic alternatives such as bistriflimide [(CF3SO2)2N] or away from halogenated compounds completely. Moves towards less toxic cations have also been growing, with compounds like ammonium salts (such as choline) proving to be as flexible a scaffold as imidazolium.

Characteristics

Ionic liquids are often moderate to poor conductors of electricity, non-ionizing (e.g. non-polar), highly viscous and frequently exhibit low vapor pressure. Their other properties are diverse: many have low combustibility, excellent thermal stability, wide liquid regions, and favorable solvating properties for a range of polar and non-polar compounds. Many classes of chemical reactions, such as Diels-Alder reactions and Friedel-Crafts reactions, can be performed using ionic liquids as solvents. Recent work has shown that ionic liquids can serve as solvents for biocatalysis.[11] The miscibility of ionic liquids with water or organic solvents varies with side chain lengths on the cation and with choice of anion. They can be functionalized to act as acids, bases or ligands, and have been used as precursor salts in the preparation of stable carbenes. Because of their distinctive properties, ionic liquids are attracting increasing attention in many fields, including organic chemistry, electrochemistry, catalysis, physical chemistry, and engineering; see for instance magnetic ionic liquid.

Despite their extremely low vapor pressures, some ionic liquids can be distilled under vacuum conditions at temperatures near 300 °C.[12] In the original work by Martyn Earle, et al., the authors wrongly concluded that the vapor was made up of individual, separated ions,[13] but was later proven that the vapors formed consisted of ion-pairs.[14] Some ionic liquids (such as 1-butyl-3-methylimidazolium nitrate) generate flammable gases on thermal decomposition. Thermal stability and melting point depend on the liquid's components. Thermal stability of various RTILs (Room Temperature Ionic Liquid) are available. The thermal stability of a task-specific ionic liquid, protonated betaine bis(trifluoromethanesulfonyl)imide is of about 534 K (502 °F) and N-Butyl-N-Methyl pyrrolidinium bis(trifluoromethanesulfonyl)imide was thermally stable up to 640 K.[15] The upper limits of thermal stability of ionic liquids reported in the literature are usually based upon fast (about 10 K/min) TGA scans, and they do not imply long-term (several hours) thermal stability of ionic liquids, which is limited to less than 500 K for most ionic liquids.[16]

The solubility of different species in imidazolium ionic liquids depends mainly on polarity and hydrogen bonding ability. Saturated aliphatic compounds are generally only sparingly soluble in ionic liquids, whereas olefins show somewhat greater solubility, and aldehydes can be completely miscible. This can be exploited in biphasic catalysis, such as hydrogenation and hydrocarbonylation processes, allowing for relatively easy separation of products and/or unreacted substrate(s). Gas solubility follows the same trend, with carbon dioxide gas showing exceptional solubility in many ionic liquids. Carbon monoxide is less soluble in ionic liquids than in many popular organic solvents, and hydrogen is only slightly soluble (similar to the solubility in water) and may vary relatively little between the more commonly used ionic liquids. Different analytical techniques have yielded somewhat different absolute solubility values.

Room temperature varieties

Room temperature ionic liquids consist of bulky and asymmetric organic cations such as 1-alkyl-3-methylimidazolium, 1-alkylpyridinium, N-methyl-N-alkylpyrrolidinium and ammonium ions. Less common, but offering some advantageous properties are phosphonium cations.[17] A wide range of anions are employed, from simple halides, which generally inflect high melting points, to inorganic anions such as tetrafluoroborate and hexafluorophosphate and to large organic anions like bistriflimide, triflate or tosylate. There are also many interesting uses of ionic liquids with simple non-halogenated organic anions such as formate, alkylsulfate, alkylphosphate or glycolate. The melting point of 1-butyl-3-methylimidazolium tetrafluoroborate with an imidazole skeleton is about −80 °C (−112 °F) and it is a colorless liquid with high viscosity at room temperature.

In many synthetic processes using transition metal catalysts, metal nanoparticles play an important role as the actual catalyst or as a catalyst reservoir. ILs are an appealing medium for the formation and stabilization of catalytically active transition metal nanoparticles. More importantly, ILs can be made that incorporate coordinating groups,[18] for example, with nitrile groups on either the cation or anion (CN-IL). In various C-C coupling reactions catalyzed by a palladium catalyst, it has been found that palladium nanoparticles are better stabilized in CN-IL compared to non-functionalized ionic liquids; thus enhanced catalytic activity and recyclability are realized.[19]

Low temperature varieties

Low temperature ionic liquids (below 130 K) have been proposed as the fluid base for an extremely large diameter spinning liquid mirror telescope to be based on the Earth's moon.[20] Low temperature is advantageous in imaging long wave infrared light which is the form of light (extremely red-shifted) that arrives from the most distant parts of the visible universe. Such a liquid base would be covered by a thin metallic film that forms the reflective surface. Low volatility is important for use in lunar vacuum conditions.

Applications

ILS find a variety of industrial applications. A few industrial applications are described below; more detailed information can be found in a recent review article.[21]

Chemical industry

The first major industrial IL application was the BASIL (Biphasic Acid Scavenging utilizing Ionic Liquids) process by BASF, in which 1-alkylimidazole scavenged the acid from an existing process. This then results in the formation of an IL which can easily be removed from the reaction mixture. This increased the space/time yield of the reaction by a factor of 80,000.[22]

Eastman operated an IL-based plant for the synthesis of 2,5-dihydrofuran from 1996 to 2004.[23]

The dimersol process is a traditional way to dimerize short chain alkenes into branched alkenes of higher molecular weight. Y. Chauvin and H. Olivier-Bourbigou developed an IL-based add-on to this process called the difasol process.[24]

Ionikylation is an IL–based process developed by Petrochina for the alkylation of four-carbon olefins with isobutane. Their 65,000 tonne per year plant is claimed to be the biggest industrial application of ionic liquids to date.[25]

Pharmaceuticals

Recognising that approximately 50% of commercial pharmaceuticals are organic salts, ionic liquid forms of a number of pharmaceuticals have been investigated. Combining a pharmaceutically active cation with a pharmaceutically active anion leads to a Dual Active ionic liquid in which the actions of two drugs are combined.[26]

Cellulose processing

At a volume of some 700 billion tons, cellulose is the earth’s most widespread natural organic chemical and, thus, highly important as a renewable resource. But even out of nature's annual 40 billion tons output, only approx. 5% is used as feedstock for further processing. More intensive exploitation of cellulose, as a renewable feedstock, is aided by the development of suitable solvents for mechanical and chemical processing. ILs have been shown to be highly effective at solvating cellulose to technically useful concentrations.[27] This may allow for development of new processes and intensification of existing ones substituting existing cellulose solvents for ILs. The use of molten salts in cellulose processing originally dates back to a patent application from 1930 where mixtures of molten 1-alkylpyridinium chlorides were used to dissolve cellulose, followed by subsequent chemical and mechanical processing.[28] Further advances have generally led to lowering of melting points and viscosities to a point where there are now room temperature ionic liquids available that dissolve cellulose.[29]

Making viscose-based fibres from dissolving pulp currently involves the use, and subsequent disposal, of great volumes of various chemical auxiliaries, esp. carbon disulfide (CS2). Major volumes of wastewater need to be disposed of. Following in the footsteps of the lyocell process, which uses hydrated N-Methylmorpholine N-oxide, as a novel non-aqueous solvent for the dissolution of the pulp, it has been suggested that IL can greatly simplify these processes, serving as solvents that are potentially recyclable. The “Institut für Textilchemie und Chemiefasern” (ITCF) in Denkendorf and BASF are jointly investigating the properties of fibers spun from solutions of cellulose dissolved in IL in a pilot plant.[30] The dissolution of cellulose–based materials like tissue paper waste, generated in chemical industries and at research laboratories, in room temperature IL 1-butyl-3-methylimidazolium chloride, bmimCl and the recovery of valuable compounds by electrodeposition from this cellulose matrix was studied.[31]

Dispersants

ILs can act as dispersing agents in paints to enhance finish, appearance and drying properties.[32]

ILs are used for dispersing nanomaterials at IOLITEC.

Gas handling

ILs have several properties that make them useful in gas storage and handling applications, including low vapor pressure, stability at high temperatures, and solvation for a wide variety of compounds and gases. They also have weakly coordinating anions and cations which are able to stabilize polar transition states. Many ionic liquids can be reused with minimal loss of activity.

The company Air Products uses ILs instead of pressurized cylinders as a transport medium for reactive gases such as trifluoroborane, phosphine and arsine. The gases are dissolved in the liquids at or below atmospheric pressure and are easily withdrawn from the containers by applying a vacuum.

Gas manufacturer Linde exploits the low solubility of hydrogen in ILs to compress the gas up to 450 bar in filling stations by using an ionic liquid piston compressor,[33] which has only 8 moving parts (down from about 500 in a conventional piston pump).

IL 1-butyl-3-methylimidazolium chloride has been used for separating hydrogen from ammonia borane.[34]

ILs and amines can be used to capture carbon dioxide CO2 and purify natural gas.[35]

Gas treatment

ION Engineering is commercializing ILs and amines for CO2 capture and natural gas sweetening.[36]

Nuclear fuel reprocessing

IL 1-butyl-3-methylimidazolium chloride has been investigated as a non-aqueous electrolyte media for the recovery of uranium and other metals from spent nuclear fuel and other sources.[37][38][39] Protonated betaine bis(trifluoromethanesulfonyl) imide has been investigated as a solvent for uranium oxides.[40] Ionic liquids, N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide and N-methyl-N-propylpiperidinium bis(trifluoromethylsulfonyl)imide, have been investigated for the electrodeposition of Europium and Uranium metals respectively.[41][42]

Solar thermal energy

ILs have potential as a heat transfer and storage medium in solar thermal energy systems. Concentrating solar thermal facilities such as parabolic troughs and solar power towers focus the sun's energy onto a receiver which can generate temperatures of around 600 °C (1,112 °F). This heat can then generate electricity in a steam or other cycle. For buffering during cloudy periods or to enable generation overnight, energy can be stored by heating an intermediate fluid. Although nitrate salts have been the medium of choice since the early 1980s, they freeze at 220 °C (428 °F) and thus require heating to prevent solidification. Ionic liquids such as [C4mim][BF4] have more favorable liquid-phase temperature ranges (-75 to 459 °C) and could therefore be excellent liquid thermal storage media and heat transfer fluids.[43]

Food and bioproducts

IL 1-butyl-3-methylimidazolium chloride completely dissolves freeze dried banana pulp and with an additional 15% DMSO, lends itself to Carbon-13 NMR analysis. In this way the entire banana complex of starch, sucrose, glucose, and fructose can be monitored as a function of banana ripening.[44]

ILs can extract specific compounds from plants for pharmaceutical, nutritional and cosmetic applications, such as the antimalarial drug artemisinin from the plant Artemisia annua.[45]

Waste recycling

ILs can aid the recycling of synthetic goods, plastics and metals. They offer the specificity required to separate similar compounds from each other, such as separating polymers in plastic waste streams. This has been achieved using lower temperature extraction processes than current approaches[46] and could help avoid incinerating plastics or dumping them in landfill.

Batteries

Researchers have identified ILs that can replace water as the electrolyte in metal-air batteries. ILs have great appeal because they evaporate at much lower rates than water, increasing battery life by drying slower. Further, ILs have an electrochemical window of up to six volts [47](versus 1.23 for water) supporting more energy-dense metals. Energy densities from 900-1600 watt-hours per kilogram appear possible.[48]

A Metal-air battery draws oxygen through a porous ambient "air" electrode (-cathode) and produces water, hydrogen peroxide, or hydroxide anions depending on the nature oxygen reduction catalyst and electrolyte. These compounds store the electrons released by the oxidation of the anode.

Safety

ILs' non-volatility effectively eliminates a major pathway for environmental release and contamination. However, this property is distinct from toxicity. ILs' aquatic toxicity is as severe as or more so than many current solvents.[49][50][51] Mortality isn't necessarily the most important metric for measuring impacts in aquatic environments, as sub-lethal concentrations change organisms' life histories in meaningful ways. Balancing VOC reductions against waterway spills (via waste ponds/streams, etc.) requires further research. ILs' substituent diversity simplify the process of identifying compounds that meet safety requirements.

Ultrasound can degrade solutions of imidazolium-based ionic liquids with hydrogen peroxide and acetic acid to relatively innocuous compounds.[52]

Despite low vapor pressure many ionic liquids are combustible and therefore require careful handling.[53] Brief exposure (5 to 7 seconds) to a flame torch can ignite some ILs. Complete combustion is possible for some ILs.

See also

References

  1. ^ D. R. MacFarlane, J. Golding, S. Forsyth, M. Forsyth and G. B. Deacon (2001). "Low viscosity ionic liquids based on organic salts of the dicyanamide anion". Chem. Commun. (16): 1430. doi:10.1039/b103064g. 
  2. ^ J. M Crosthwaite, M. J. Muldoon, J. K. Dixon, J. L. Anderson and J. F. Brennecke (2005). "Phase transition and decomposition temperatures, heat capacities and viscosities of pyridinium ionic liquids". J. Chem. Thermodyn. 37 (6): 559–568. doi:10.1016/j.jct.2005.03.013. 
  3. ^ http://www.google.com/patents/about?id=4K_IAAAAEBAJ&dq=7588694 Mixture of nitrate salts with m.p. below 100 deg C
  4. ^ R. M. Barrer (1943). "The Viscosity of Pure Liquids. II. Polymerised Ionic Melts". Trans. Faraday Soc. 39: 59–67. doi:10.1039/tf9433900059. 
  5. ^ S. Gabriel, J. Weiner (1888). "Ueber einige Abkömmlinge des Propylamins". Ber. 21 (2): 2669–2679. doi:10.1002/cber.18880210288. 
  6. ^ Paul Walden (1914), Bull. Acad. Sci. St. Petersburg, pages 405-422
  7. ^ H. L. Chum, V. R. Koch, L. L. Miller, R. A. Osteryoung (1975). "Electrochemical scrutiny of organometallic iron complexes and hexamethylbenzene in a room temperature molten salt". J. Am. Chem. Soc. 97 (11): 3264. doi:10.1021/ja00844a081. 
  8. ^ J. S. Wilkes, J. A. Levisky, R. A. Wilson, C. L. Hussey (1982). "Dialkylimidazolium chloroaluminate melts: a new class of room-temperature ionic liquids for electrochemistry, spectroscopy and synthesis". Inorg. Chem. 21 (3): 1263–1264. doi:10.1021/ic00133a078. 
  9. ^ R. J. Gale, R. A. Osteryoung (1979). "Potentiometric investigation of dialuminium heptachloride formation in aluminum chloride-1-butylpyridinium chloride mixtures". Inorganic Chemistry 18 (6): 1603. doi:10.1021/ic50196a044. 
  10. ^ J. S. Wilkes, M. J. Zaworotko Chemical Communications 1992, 965-967
  11. ^ Adam J. Walker and Neil C. Bruce (2004). "Cofactor-dependent enzyme catalysis in functionalized ionic solvents". Chemical Communications 2004 (22): 2570–1. doi:10.1039/b410467f. PMID 15543284. 
  12. ^ Martyn J. Earle, José M.S.S. Esperança, Manuela A. Gilea, José N. Canongia Lopes, Luís P.N. Rebelo, Joseph W. Magee, Kenneth R. Seddon and Jason A. Widegren (2006). "The distillation and volatility of ionic liquids". Nature 439 (7078): 831–4. Bibcode 2006Natur.439..831E. doi:10.1038/nature04451. PMID 16482154. 
  13. ^ Peter Wasserscheid (2006). "Volatile times for ionic liquids". Nature 439 (7078): 797. Bibcode 2006Natur.439..797W. doi:10.1038/439797a. PMID 16482141. 
  14. ^ James P. Armstrong, Christopher Hurst, Robert G. Jones, Peter Licence, Kevin R. J. Lovelock, Christopher J. Satterley and Ignacio J. Villar-Garcia (2007). "Vapourisation of ionic liquids". Physical Chemistry Chemical Physics 9 (8): 982–90. Bibcode 2007PCCP....9..982A. doi:10.1039/b615137j. PMID 17301888. 
  15. ^ Ch. Jagadeeswara Rao, R. Venkata krishnan, K. A. Venkatesan, K. Nagarajan, 332 - 334, Feb. 4-6, Sixteenth national symposium on thermal analysis(Thermans 2008)
  16. ^ Marek Kosmulski, Jan Gustafsson and Jarl B. Rosenholm (2004). "Thermal stability of low temperature ionic liquids revisited". Thermochimica Acta 412: 47–53. doi:10.1016/j.tca.2003.08.022. 
  17. ^ K. J. Fraser, D. R. MacFarlane (2009). "Phosphonium-Based Ionic Liquids: An Overview". Aust J. Chem. 62: 309–321. doi:10.1071/ch08558. 
  18. ^ X. Li, D. Zhao, Z. Fei, L. Wang (2006). "Applications of Functionalized Ionic Liquids". Science in China: B 35 (5): 181. doi:10.1007/s11426-006-2020-y. 
  19. ^ Zhao, D.; Fei, Z.; Geldbach, T. J.; Scopelliti, R.; Dyson, P. J. (2004). "Nitrile-Functionalized Pyridinium Ionic Liquids: Synthesis, Characterization, and Their Application in Carbon-Carbon Coupling Reactions". J. Am. Chem. Soc. 126 (48): 15876–82. doi:10.1021/ja0463482. PMID 15571412. 
  20. ^ E. F. Borra, O. Seddiki, R. Angel, D. Eisenstein, P. Hickson, K. R. Seddon and S. P. Worden (2007). "Deposition of metal films on an ionic liquid as a basis for a lunar telescope". Nature 447 (7147): 979–981. Bibcode 2007Natur.447..979B. doi:10.1038/nature05909. PMID 17581579. 
  21. ^ Plechkova, N.V., Seddon, K.R., 2008, Chem. Soc. Rev., 123. DOI weblink (subscription only)
  22. ^ "BASF to present BASIL ionic liquid process at technology transfer forum" (Press release). BASF. 2004-05-10. http://www.basf.com/corporate/051004_ionic.htm. 
  23. ^ . April 2008. 
  24. ^ . February 2010. 
  25. ^ . February 2010. 
  26. ^ J. Stoimenovski, D. R. MacFarlane, K. Bica, R. D. Rogers (2010). "Crystalline vs. Ionic Liquid Salt Forms of Active Pharmaceutical Ingredients: A Position Paper". Pharmaceutical Research 27: 521–526. doi:10.1007/s11095-009-0030-0. 
  27. ^ Richard P. Swatloski, Scott K. Spear, John D. Holbrey, and Robin D. Rogers (2002). "Dissolution of Cellulose with Ionic Liquids". Journal of the American Chemical Society 124/18 (18): 4974–4975. doi:10.1021/ja025790m. 
  28. ^ Charles Graenacher, Manufacture and Application of New Cellulose Solutions and Cellulose Derivatives Produced therefrom, US 1934/1943176.
  29. ^ Hiroyuki Ohno and Yukinobu Fukaya (2009). "Task Specific Ionic Liquids for Cellulose Technology". Chemistry Letters 38: 2–7. doi:10.1246/cl.2009.2. 
  30. ^ Frank Hermanutz, Frank Gähr, Klemens Massonne, Eric Uerdingen, oral presentation at the 45th Chemiefasertagung, Dornbirn, Austria, September 20th – 22nd, 2006
  31. ^ Ch. Jagadeeswara Raoa, K.A. Venkatesana, K. Nagarajana, T.G. Srinivasan and P.R. Vasudeva Rao (2007). "Treatment of tissue paper containing radioactive waste and electrochemical recovery of valuables using ionic liquids". Electrochimica Acta 53 (4): 1911–1919. doi:10.1016/j.electacta.2007.08.043. 
  32. ^ Examples are the TEGO brand dispersers by Evonik, used in their Pliolite brand paints.
  33. ^ Zemships - Ionic liquid compression
  34. ^ A. Karkamkar, C. Aardahl, T. Autrey (2007). "Recent Developments on Hydrogen Release from Ammonia Borane" (PDF). Material Matters 2 (2): 6–9. http://www.sigmaaldrich.com/etc/medialib/docs/Aldrich/Brochure/al_material_matters_v2n2.pdf. 
  35. ^ C&E News
  36. ^ C&E News
  37. ^ P. Giridhar, K.A. Venkatesan, T.G. Srinivasan and P.R. Vasudeva Rao (2007), Electrochemical behavior of uranium(VI) in 1-butyl-3-methylimidazolium chloride and thermal characterization of uranium oxide deposit, Electrochimica Acta, Volume 52, Issue 9, Pages 3006-3012,
  38. ^ M. Jayakumar, K.A. Venkatesan and T.G. Srinivasan (2007), Electrochemical behavior of fission palladium in 1-butyl-3-methylimidazolium chloride Electrochimica Acta, Volume 52, Issue 24, 1 August 2007, Pages 7121-7127, doi:10.1016/j.electacta.2007.05.049
  39. ^ M. Jayakumar, K.A. Venkatesan, T.G. Srinivasan, P.R. Vasudeva Rao (), Extraction-Electrodeposition (EX-EL) process for the recovery of fission palladium from high-level liquid waste J. Applied Electrochem., doi:10.1007/s10800-009-9905-3
  40. ^ Ch. Jagadeeswara Rao, K.A. Venkatesan, K. Nagarajan, T.G. Srinivasan (2008), Dissolution of uranium oxides and electrochemical behavior of U(VI) in task specific ionic liquid Radiochimica acta, volume 96,issue 7 pages 403409 doi:10.1524/ract.2008.1508
  41. ^ Ch. Jagadeeswara Rao, K.A. Venkatesan, K. Nagarajan, T.G. Srinivasan and P. R. Vasudeva Rao, Electrodeposition of metallic uranium at near ambient conditions from room temperature ionic liquid, Journal of Nuclear Materials, 408 (2011) 25 – 29.
  42. ^ Ch. Jagadeeswara Rao, K.A. Venkatesan, K. Nagarajan, T.G. Srinivasan and P. R. Vasudeva Rao, Electrochemical behavior of europium (III) in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, Electrochimica Acta, Volume 54, Issue 20, 1 August 2009, Pages 4718-4725
  43. ^ Banqui Wu, Ramana G. Reddy and Robin D. Rogers (2001). "Novel ionic liquid thermal storage for solar thermal electric power systems". International Solar Energy Conference: 445–451. 
  44. ^ Fort, D.A, Swatloski, R.P., Moyna, P., Rogers, R.D., Moyna, G. Chem. Commun. 2006, 714
  45. ^ A.Lapkin, P.K. Plucinski, M. Cutler, (2006). "Comparative assessment of technologies for extraction of artemisinin". Journal of Natural Products 11 (69): 1653–1664. doi:10.1021/np060375j. PMID 17125242. http://pubs.acs.org/doi/abs/10.1021/np060375j. 
  46. ^ [1]
  47. ^ Michel Armand, Frank Endres, Douglas R. MacFarlane, Hiroyuki Ohno and Bruno Scrosati (2009). "Ionic-liquid materials for the electrochemical challenges of the future". Nature Materials 8 (8): 621–629. Bibcode 2009NatMa...8..621A. doi:10.1038/nmat2448. PMID 19629083. http://www.nature.com/nmat/journal/v8/n8/full/nmat2448.html. 
  48. ^ "Betting on a Metal-Air Battery Breakthrough". Technology Review. November 5, 2009. http://www.technologyreview.com/energy/23877/. Retrieved November 07, 2009. 
  49. ^ C Pretti, C Chiappe, D Pieraccini, M Gregori, F Abramo, G Monni and L Intorre (2006). "Acute toxicity of ionic liquids to the zebrafish (Danio rerio)". Green Chem. 8 (3): 238–240. doi:10.1039/b511554j. 
  50. ^ D. Zhao, Y. Liao and Z. Zhang (2007). "Toxicity of Ionic Liquids". CLEAN - Soil, Air, Water 35 (1): 42–48. doi:10.1002/clen.200600015. 
  51. ^ J Ranke, S Stolte, R Störmann, J Arning and B Jastorff (2007). "Design of sustainable chemical products - the example of ionic liquids". Chem. Rev. 107 (6): 2183–2206. doi:10.1021/cr050942s. PMID 17564479. 
  52. ^ Xuehui Li, Jinggan Zhao, Qianhe Li, Lefu Wang and Shik Chi Tsang (2007). "Ultrasonic chemical oxidative degradations of 1,3-dialkylimidazolium ionic liquids and their mechanistic elucidations". Dalton Trans. (19): 1875. doi:10.1039/b618384k. 
  53. ^ Marcin Smiglak, W. Mathew Reichert, John D. Holbrey, John S. Wilkes, Luyi Sun, Joseph S. Thrasher, Kostyantyn Kirichenko, Shailendra Singh, Alan R. Katritzky and Robin D. Rogers (2006). "Combustible ionic liquids by design: is laboratory safety another ionic liquid myth?". Chemical Communications 2006 (24): 2554–2556. doi:10.1039/b602086k. PMID 16779475. 
  54. ^ G. Raabe and J. Köhler (2008). "Thermodynamical and structural properties of imidazolium based ionic liquids from molecular simulation". J. Chem. Phys. 128 (15): 154509. Bibcode 2008JChPh.128o4509R. doi:10.1063/1.2907332. PMID 18433237. 

Further reading

Freemantle, Michael (2009). An Introduction to Ionic Liquids. Royal Society of Chemistry. ISBN 9781847551610.